 |
 |
|
|
 |
 |
 |
 |
 |
CHAPTER LIBRARY
The
Chapter's library is housed at San Jose State University
in the Engineering Building, Room ENG 209.
Contact Professor Akthem Al-Manaseer
at
San Jose State University
Department of Civil and Environmental Engineering
1 Washington Square
San Jose, California 95192-0083
Phone: (408) 924-3860
Fax: (408) 924-4004
E-mail: akthem@email.sjsu.edu
SP - Publications |
|||
| SP-1 | Concrete Primer | ||
| SP-4 | Formwork for Concrete, 3rd Edition (missing) | ||
| SP-4 | Formwork for Concrete, 7th Edition | ||
| SP-15(72) | Specification for Structural Concrete for buildings, ACI 301-72 (Field Reference Manual) | ||
| SP-15(72) | Specification for Structural Concrete for Buildings, ACI 301-72 (Field Reference Manual) | ||
| SP-15(73) | Specification for Structural Concrete for Buildings, ACI 301-72 (Revised 1973) (Field Reference Manual) | ||
| SP-15(75) | Specification for Structural Concrete for Buildings, ACI 301-72 (Revised 1975) (Field Reference Manual) | ||
| SP-15(88) | Specification for Structural Concrete for Buildings, ACI 301-84 (Revised 1988) (Field Reference Manual) | ||
| SP-15(89) | Specification for Structural Concrete for Buildings, ACI 301-89 (Field Reference Manual) | ||
| SP-17(73) | Design Handbook, Volume 1 (In Accordance with the Strength Design Method of ACI 318-27) | ||
| SP-17(73) | Design Handbook, Volume 1 (In Accordance with the Strength Design Method of ACI 318-27) | ||
| SP-17(73)(S) | Slab Design, Supplement to Design Handbook Volume 1 (In Accordance with ACI 318-77) | ||
| SP-17(81) | Design Handbook, Volume 1; Beams, Slabs, Brackets, Footings, and Pile Caps. (In Accordance with ACI 318-77) | ||
| SP-17(84) | Design Handbook, Volume 1; Beams, Slabs, Brackets, Footings, and Pile Caps. (In Accordance with ACI 318-83) | ||
| SP-17(84)(S) | Design Of Two-Way
Slabs, Supplement To Design Handbook Volume 1 (In Accordance with Strength Design Method of ACI 318-83) |
||
| SP-17A(78) | Design Handbook, Volume 2; Columns (In Accordance with ACI 318-77) | ||
| SP-17A(85) | Design Handbook, Volume 2; Columns (In Accordance with ACI 318-83) | ||
| SP-27 | Designing for Effects of Creep and Shrinkage Temperature In Concrete Structures | ||
| SP-28 | Concrete Thin Shells | ||
| SP-30 | Cracking, Deflection, and Ultimate Load of Concrete Slab Systems | ||
| SP-32 | Menzel Symposium on High Pressure Steam Curing | ||
| SP-33 | Impact of Computers on the Practice of Structural Engineering In Concrete | ||
| SP-35 | Analysis of Structural Systems for Torsion | ||
| SP-39 | Behavior of Concrete Under Temperature Extremes | ||
| SP-48 | Industrialization in Concrete Building Construction | ||
| SP-55 | Douglas McHenry International Symposium on Concrete and Concrete Structures | ||
| SP-58 | Polymers in Concrete, International Symposium | ||
| SP-59 | Concrete Design: U.S. and European Practices (ACI-CEB-PCI-FIP Symposium) | ||
| SP-63 | Reinforced Concrete Structures Subjected To Wind and Earthquake Forces | ||
| SP-66 | ACI Detailing Manual - 1980 | ||
| SP-66 | ACI Detailing Manual - 2004 | ||
| SP-66(88) | ACI Detailing Manual - 1988 | ||
| SP-69 | Applications of Polymer Concrete | ||
| SP-70 | Joint Sealing and Bearing Systems for Concrete Structures, Volume 1 | ||
| SP-70 | Joint Sealing and Bearing Systems for Concrete Structures, Volume 2 | ||
| SP-71(84) | ASTM Standards in ACI 301, 318, and 349 | ||
| SP-72 | Significant Developments in Engineering Practice and Research, A Tribute to Chester P. Siess | ||
| SP-73 | Dynamic Modeling of Concrete Structures | ||
| SP-74 | Monolithic Refractories | ||
| SP-79 | Fly Ash, Silica Fume, Slag and Other Mineral By-Products in Concrete, Volume 2 | ||
| SP-84 | Earthquake Effects on Reinforced Concrete Structures US - Japan Research | ||
| SP-86 | Deflections of Concrete Structures | ||
| SP-90 | Forming Economical Concrete Buildings Proceedings of the Second International Conference | ||
| SP-93 | Concrete in Transportation | ||
| SP-95 | Properties of Concrete at Early Ages | ||
| SP-97 | Analysis and Design of High Rise Concrete Buildings | ||
| SP-103 | Anchorage to Concrete | ||
| SP-110 | Hyperbolic Paraboloid Shells State-of-the-Art | ||
| SP-113 | Cracking in Prestressed Concrete Structures | ||
| SP-115(89) | Specifications for Masonry Structures ACI 530.1-88/ASCE 6-88 (Reference Manual) | ||
| SP-115(92) | Specifications for Masonry Structures, ACI 530.1-92/ASCE 6-92/TMS 602-92 (Reference Manual with ASTM References) | ||
| SP-116 | Polymers in Concrete: Advances and Applications | ||
| SP-120 | External Prestressing in Bridges | ||
| SP-123 | Design of Beam-Column Joints for Seismic Resistance | ||
| SP-124 | Thin-Section Fiber Reinforces Concrete and Ferrocement | ||
| SP-127 | Earthquake-Resistant Concrete Structures, Inelastic Response and Design | ||
| SP-130 | Anchors in Concrete - Design and Behavior | ||
| SP-131 | Durability of Concrete G.M. Idorn International Symposium | ||
| SP-133 | Designing Concrete Structures for Serviceability and Safety | ||
| SP-134 | Concrete Design Based on Fracture Mechanics | ||
| SP-160 | Seismic Rehabilitation of Concrete Structures | ||
| SP-162 | Mete A. Sozen Symposium - A Tribute from His Students | ||
| SP-182 | Structural Applications of Fiber Reinforced Concrete | ||
| SP-183 | The Design of Two-Way Slabs | ||
| SP-196 | Composite and Hybrid Systems | ||
| SP-197 | Behavior and Design of Concrete Streets for Seismic Performance | ||
| SP-199 | Seventh Canment/ACI Fly Ash, Silica Fume, Slag and Natural Pozzolans in Concrete, 2001 Volume 1 | ||
| SP-199 | Seventh Canment/ACI Fly Ash, Silica Fume, Slag and Natural Pozzolans in Concrete, 2001 Volume 2 | ||
| SP-200 | Fifth Canment/ACI International Conference on Recent Advances in Concrete Technology | ||
| SP-201 | Fracture Mechanics for Concrete Materials: Testing and Applications | ||
| SP-202 | Third Canment/ACI International Symposium on Sustainable Development of Cement and Concrete | ||
| SP-203 | Code Provisions for Deflection Control in Concrete Structures | ||
| SP-204 | Design and Construction Practice to Mitigate Cracking | ||
| SP-205 | Finite Element Analysis of Reinforced Concrete Structures | ||
| SP-206 | Concrete Material Science to Application | ||
| SP-207 | High Performance Concrete | ||
| SP-208 | Examples for the Design of Structural Concrete with Strut and Tie Models | ||
| SP-208 | Examples for the Design of Structural Concrete with Strut and Tie Models | ||
| SP-209 | Innovations in Design with Emphasis on Seismic, Wind, and Environmental Loading; Quality Control and Innovations in Materials/Hot Weather Concreting | ||
| SP-210 | Deflection Control for the Future | ||
| SP-211 | Large-Scale Structural Testing | ||
| SP-212 | Sixth Canmet/ACI International Conference on Durability of Concrete | ||
| SP-213 | The Art and Science of Structural Concrete Design | ||
| SP-214 | Polymers in Concrete: The First Thirty Years | ||
| SP-215 | Field Applications of FRP Reinforcement: Case Studies | ||
| SP-216 | Innovations in Fiber-Reinforced Concrete for Value | ||
| SP-217 | Seventh Canmet/ACI | ||
| SP-218 | High Performance Structural Lightweight Concrete | ||
| SP-219 | Recycling Concrete and Other Materials for Sustainable Development | ||
| SP-220 | Autogenous Deformation of Concrete | ||
| SP-221 | 2004 Eighth Canmet: Flyash, Silica Fume, Slag, and Natural Pozzolans in Concrete | ||
| SP-222 | 2004 Seventh Canmet/ACI Recent Advances in Concrete Technology | ||
| SP-223 | Investigating Concrete: Selected Works of Bryant and Katherine Mather | ||
| SP-224 | Thin Reinforcement Cement-Based Products and Construction Systems | ||
| SP-225 | Serviceability of Concrete, A Symposium Honoring Dr. Edward G. Nawy | ||
| SP-226 | Autoclaved Aerated Concrete-Properties and Structural Design | ||
| SP-227 | Shrinkage and Creep of Concrete | ||
ACI - Publications |
|||
| ACI 104-71 | Preparation of Notation for Concrete (ACI 104-71) (Revised 1982) | ||
| ACI 104-71 | Preparation of Notation for Concrete (ACI 104-71) (Revised 1982) | ||
| ACI 117-81 | Standard Tolerances for Concrete Construction and Materials (ACI 117-81) | ||
| ACI 117-90 ACI 117R-90 |
Standard Tolerances for Concrete Construction and Materials (ACI 117-90) and Commentary (ACI 117R-90) | ||
| ACI 117-06 ACI 117R-06 |
Specification for Tolerances for Concrete Construction and Materials (ACI 117-06) and Commentary (ACI 117R-06) | ||
| ACI 121R-98 | Quality Management System for Concrete Construction | ||
| ACI 121R-04 | Quality Management System for Concrete Construction | ||
| ACI 122R-02 | Guide to Thermal Properties of Concrete and Masonry Systems | ||
| ACI 201 | Guide to Durable Concrete | ||
| ACI 201.2R-92 | Guide to Durable Concrete | ||
| ACI 201.2R-01 | Guide to Durable Concrete | ||
| ACI 201.3R-86 | Guide for Making a Condition Survey of Concrete Pavements | ||
| ACI 207.1R-87 | Mass Concrete | ||
| ACI 209R-92 | Prediction of Creep, Shrinkage and Temperature Effects in Concrete Structures | ||
| ACI 211.1-74 | Recommended Practice for Selecting Proportions for Normal and Heavyweight Concrete (ACI 211.1-74) | ||
| ACI 211.1-74 | Recommended Practice for Selecting Proportions for Normal and Heavyweight Concrete (ACI 211.1-74) (Revised 1975) | ||
| ACI 211.1-77 | Recommended Practice for Selecting Proportions for Normal and Heavyweight Concrete (ACI 211.1-77) | ||
| ACI 211.1-81 | Standard Practice for Selecting Proportions for Normal, Heavyweight and Mass Concrete (ACI 211.1-81) | ||
| ACI 211.2-69 | Recommended Practice for Selecting Proportions for Structural Lightweight Concrete (ACI 211.2-69) (Revised 1977) | ||
| ACI 211.2-81 | Standard Practice for Selecting Proportions for Structural Lightweight Concrete (ACI 211.2-81) | ||
| ACI 211.3-75 | Standard Practice for Selecting Proportions for No-Slump Concrete (ACI 211.3-75) (Revised 1987) (Reapproved 1992) | ||
| ACI 211.3R-02 | Guide for Selecting Proportions for No-Slump Concrete | ||
| ACI 211.5R-01 | Guide for Submittal of Concrete Proportions | ||
| ACI 212.1R-81 ACI 212.2R-81 |
Admixtures for Concrete and Guide for Use of Admixtures in Concrete | ||
| ACI 212.3R-91 | Chemical Admixtures for Concrete | ||
| ACI 212.3R-04 | Chemical Admixtures for Concrete | ||
| ACI 213-03 | Guide for Structural Lighweight Aggregate Concrete | ||
| ACI 213R-79 | Guide for Lightweight Aggregate Concrete | ||
| ACI 214-77 | Recommended Practice for Evaluation of Strength Test Results of Concrete (ACI 214-77) | ||
| ACI 214R-02 | Evaluation of Strength Test Results of Concrete | ||
| ACI 214.4R-03 | Guide for Obtaining Cores and Interpreting Compressive Strength Results | ||
| ACI 215R-74 | Considerations for Design of Concrete Structures Subjected to Fatigue Loading (Revised 1992) | ||
| ACI 216R-81 | Guide for Determining the Fire Endurance of Concrete Elements | ||
| ACI 221.1R-98 | State-of-the-Art Report on Alkali - Aggregate Reactivity | ||
| ACI 222R-01 | Protection of Metals in Concrete Against Corrosion | ||
| ACI 222.2R-01 | Corrosion of Prestressing Steels | ||
| ACI 222.3R-03 | Design and Construction Practice to Mitigate Corrosion of Reinforcement in Concrete Structures | ||
| ACI 223-77 | Recommended Practice for the Use of Shrinkage-Compensating Concrete (ACI 223-77) | ||
| ACI 223-83 | Standard Practice for the Use of Shrinkage-Compensating Concrete (ACI 223-83) | ||
| ACI 223-90 | Standard Practice for the Use of Shrinkage-Compensating Concrete (ACI 223-90) | ||
| ACI 223-98 | Standard Practice for the Use of Shrinkage-Compensating Concrete | ||
| ACI 224R-80 | Control of Cracking in Concrete Structures | ||
| ACI 224R-01 | Control of Cracking in Concrete Structures | ||
| ACI 224.2R-92 | Cracking of Concrete Members in Direct Tension | ||
| ACI 225R-85 | Guide to the Selection and Use of Hydraulic Cements | ||
| ACI 226.1R-87 | Ground Granulated Blast-Furnace Slag as a Cementitious Constituent in Concrete | ||
| ACI 226.3R-87 | Use of Fly Ash in Concrete | ||
| ACI 228.1R-89 | In-Place Methods for Determination of Strength of Concrete | ||
| ACI 228.1R-03 | In-Place Methods to Estimate Concrete Strength | ||
| ACI 230.1R-90 | State-of-the-Art Report on Soil Cement | ||
| ACI 232.2R-03 | Use of Flyash in Concrete | ||
| ACI 233R-03 | Slag Cement in Concrete and Mortar | ||
| ACI 234R-96 | Guide for the Use of Silica Fume in Concrete | ||
| ACI 301-72 | Specifications for Structural Concrete for Buildings (ACI 301-72) (Revised 1973) | ||
| ACI 301-72 | Specifications for Structural Concrete for Buildings (ACI 301-72) (Revised 1973) | ||
| ACI 301-72 | Specifications for Structural Concrete for Buildings (ACI 301-72) (Revised 1981) | ||
| ACI 301-84 | Specifications for Structural Concrete for Buildings (ACI 301-84) | ||
| ACI 301-84 | Specifications for Structural Concrete for Buildings (ACI 301-84) (Revised 1988) | ||
| ACI 301-89 | Specifications for Structural Concrete for Buildings (ACI 301-89) | ||
| ACI 301-99 | Specifications for Structural Concrete for Buildings (ACI 301-99) | ||
| ACI 302-69 | Recommended Practice for Concrete Floor and Slab Construction (ACI 302-69) | ||
| ACI 302.1R-96 | Guide for Concrete Floor and Slab Construction | ||
| ACI 302.1R-04 | Guide for Concrete Floor and Slab Construction | ||
| ACI 303R-91 | Guide to Cast-in-Place Architectural Concrete Practice | ||
| ACI 303R-91 | Guide to Cast-in-Place Architectural Concrete Practice | ||
| ACI 303R-04 | Guide to Cast-in-Place Architectural Concrete Practice | ||
| ACI 304.1R-92 | Guide for the Use of Preplaced Aggregate Concrete for Structural and Mass Concrete Applications | ||
| ACI 305 | Hot Weather Concreting | ||
| ACI 305R-89 | Hot Weather Concreting | ||
| ACI 306 | Cold Weather Concreting | ||
| ACI 306R-88 | Cold Weather Concreting | ||
| ACI 306.1-87 | Standard Specification for Cold Weather Concreting (ACI 306.1-87) | ||
| ACI 306.1-90 | Standard Specification for Cold Weather Concreting (ACI 306.1-90) | ||
| ACI 307-79 | Specification for the Design and Construction of Reinforced Concrete Chimneys (ACI 307-79) | ||
| ACI 307-98 ACI 307R-98 |
Design and Construction of Reinforced Concrete Chimneys (ACI 307-98) and Commentary (ACI 307R-98) | ||
| ACI 308-71 | Recommended Practice for Curing Concrete (ACI 308-71) | ||
| ACI 308-81 | Standard Practice for Curing Concrete (ACI 308-81) (Revised 1986) | ||
| ACI 308-92 | Standard Practice for Curing Concrete (ACI 308-92) | ||
| ACI 308R-01 | Guide to Curing Concrete | ||
| ACI 309-72 | Standard Practice for Consolidation of Concrete (ACI 309-72) (Revised 1982) | ||
| ACI 309.1R-93 | Behavior of Fresh Concrete During Vibration | ||
| ACI 309.2R-82 | Identification and Control of Consolidation-Related Surface Defects in Formed Concrete | ||
| ACI 309.2R-98 | Identification and Control of Visible Effects of Consolidation on Formed Concrete Surfaces | ||
| ACI 309.2R-98 | Identification and Control of Visible Effects of Consolidation on Formed Concrete Surfaces | ||
| ACI 311.5-04 | Guide for Concrete Plant Inspection and Testing of Ready-Mixed Concrete | ||
| ACI 311.5R-97 | Guide for Concrete Plant Inspection and Field Testing of Ready-Mixed Concrete | ||
| ACI 311.5R-04 | Guide for Concrete Plant Inspection and Testing of Ready-Mixed Concrete | ||
| ACI 313-77 | Recommended Practice for Design and Construction of Concrete Bins, Silos, and Bunkers for Storing Granular Materials (ACI 313-77) and Commentary | ||
| ACI 313-77 ACI 313R-77 |
Recommended Practice for Design and Construction of Concrete Bins, Silos, and Bunkers for Storing Granular Materials (ACI 313-77) (Revised 1983) and Commentary (ACI 313R-77) | ||
| ACI 313-91 ACI 313R-91 |
Recommended Practice for Design and Construction of Concrete Bins, Silos, and Bunkers for Storing Granular Materials (ACI 313-91) and Commentary (ACI 313R-91) | ||
| ACI 316-74 | Recommended Practice for Construction of Concrete Pavements and Concrete Bases (ACI 316-74) (Revised 1975) | ||
| ACI 316R-82 | Recommendations for Construction of Concrete Pavements and Concrete Bases | ||
| ACI 318-71 | Building Code Requirements | ||
| ACI 318-71 | Step-by-Step Design Procedures in Accordance with the Strength Design Method of ACI 318-71 | ||
| ACI 318-77 | Building Code Requirements for Reinforced Concrete (ACI 318-77) | ||
| ACI 318-83 | Building Code Requirements for Reinforced Concrete (ACI 318-83) | ||
| ACI 318-83 | Building Code Requirements for Reinforced Concrete (ACI 318-83) (Revised 1986) | ||
| ACI 318R-83 | Commentary on Building Code Requirements for Reinforced Concrete (ACI 318-83) | ||
| ACI 318-83 ACI 318M-83 |
1986 Supplement to Building Code Requirements for Reinforced Concrete (ACI 318-83) and Commentary (ACI 318 M-83) | ||
| ACI 318.1-83 ACI 318.1R-83 |
Building Code Requirements for Structural Plain Concrete (ACI 318.1-83) and Commentary (ACI 318.1R-83) | ||
| ACI 318.1-89 ACI 318.1R-89 |
Building Code Requirements for Structural Plain Concrete (ACI 318.1-89) and Commentary (ACI 318.1R-89) | ||
| ACI 318.1-89 ACI 318.1R-89 |
Building Code Requirements for Structural Plain Concrete (ACI 318.1-89) (Revised 1992) and Commentary (ACI 318.1R-89) | ||
| ACI 318-99 ACI 318R-99 |
Building Code Requirements for Structural Concrete (ACI 318-99) and Commentary (ACI 318R-99) | ||
| ACI 318-99 ACI 318R-99 |
Building Code Requirements for Structural Concrete (ACI 318-99) and Commentary (ACI 318R-99) | ||
| ACI 318-99 | Notes on Building Code Requirements for Structural Concrete (ACI 318-99) | ||
| ACI 318-99 | Seminar Notes on ACI 318-99 Code Revisions | ||
| ACI 318-02 ACI 318R-02 |
Building Code Requirements for Structural Concrete (ACI 318-02) and Commentary (ACI 318R-02) | ||
| ACI 318-02 ACI 318R-02 |
Building Code Requirements for Structural Concrete (ACI 318-02) and Commentary (ACI 318R-02) | ||
| ACI 318-02 | Notes on Building Code Requirements for Structural Concrete | ||
| ACI 318-02 | Seminar Notes on ACI 318-02 Code Revisions | ||
| ACI 325.6R-88 | Texturing Concrete Pavements | ||
| ACI 325.9R-91 | Guide to Construction of Concrete Pavements and Concrete Bases | ||
| ACI 325.12-02 | Guide for Design of Jointed Concrete Pavements for Stress and Local Roads | ||
| ACI 330R-87 | Guide for Design and Construction of Concrete Parking Lots | ||
| ACI 330R-92 | Guide for Design and Construction of Concrete Parking Lots | ||
| ACI 330R-01 | Guide for Design and Construction of Concrete Parking Lots | ||
| ACI 330.1-03 | Specifications for unreinforced Concrete Parking Lots | ||
| ACI 332R-84 | Guide to Residential Cast-in-Place Concrete Construction | ||
| ACI 332-04 | Requirements for Residential Concrete Construction and Commentary | ||
| ACI 332.1R-06 | Guide to Residential Concrete Construction | ||
| ACI 334.1R-92 | Concrete Shell Structures Practice and Commentary | ||
| ACI 336.1-79 | Standard Specifications for the Construction of End Bearing Drilled Piers (ACI 336.1-79) | ||
| ACI 336.1-79 | Standard Specifications for the Construction of End Bearing Drilled Piers (ACI 336.1-79) (Revised 1985) | ||
| ACI 336.1 ACI 336.1R-98 |
Reinforced Specifications for the Construction of Drilled Piers (ACI 336.1) and Commentary (ACI 336.1R-98) | ||
| ACI 336.1-01 | Specification for the Construction of Drilled Piers | ||
| ACI 336.3R-93 | Design and Construction of Drilled Piers | ||
| ACI 343R-88 | Analysis and Design of Reinforced Concrete Bridge Structures | ||
| ACI 345-74 | Recommended Practice for Concrete Highway Bridge Deck Construction (ACI 345-74) | ||
| ACI 345-82 | Standard Practice for Concrete Highway Bridge Deck Construction (ACI 345-82) | ||
| ACI 345.1R-83 | Routine Maintenance of Concrete Bridges | ||
| ACI 345.1R-92 | Routine Maintenance of Concrete Bridges | ||
| ACI 345.2R-89 | Guide for Widening Highway Bridges | ||
| ACI 346-81 ACI 346R-81 |
Specifications for Cast-in-Place Non-reinforced Concrete Pipe (ACI 346-81) and Recommendations for Cast-in-Place Non-reinforced Pipe (ACI 346R-81) | ||
| ACI 346-90 ACI 346R-90 |
Specifications for Cast-in-Place Non-reinforced Concrete Pipe (ACI 346-90) and Recommendations for Cast-in-Place Non-reinforced Pipe (ACI 346R-90) | ||
| ACI 346-01 | Specification for Cast-in-Place Concrete Pipe | ||
| ACI 347-68 | Recommended Practice for Concrete Formwork (ACI 347-68) | ||
| ACI 347-78 | Recommended Practice for Concrete Formwork (ACI 347-78) | ||
| ACI 347R-88 | Guide to Formwork for Concrete | ||
| ACI 347-01 | Guide to Formwork for Concrete | ||
| ACI 347-04 | Guide to Formwork for Concrete | ||
| ACI 349-76 | 1978 Supplement to Code Requirements for Nuclear Safety Related Concrete Structures (ACI 349-76) and Commentary (ACI 349-76) | ||
| ACI 349-80 | 1984 Supplement to Code Requirements for Nuclear Safety Related Concrete Structures (ACI 349-80) and Commentary (ACI 349-80) | ||
| ACI 349-01 ACI 349R-01 |
Code Requirements for Nuclear Safety Related Concrete Structures (ACI 349-01) and Commentary (ACI 349R-01) | ||
| ACI 349.1R-80 | Reinforced Concrete for Thermal Effects on Nuclear Power Plant Structures | ||
| ACI 349.3R-02 | Evaluation of Existing Nuclear Safety Related Concrete Structures | ||
| ACI 350 | Concrete Sanitary Engineering Structures | ||
| ACI 350R-89 | Environmental Engineering Concrete Structures | ||
| ACI 350-01 ACI 350R-01 |
Code Requirements for Environmental Engineering Concrete Structures (ACI 350-01) and Commentary (ACI 350R-01) | ||
| ACI 350.1-01 | Tightness Testing of Environmental Engineering Concrete Structures (ACI 350.1-01) | ||
| ACI 350.2R-04 | Concrete Structures for Containment of Hazardous Materials | ||
| ACI 350.3-01 ACI 350.3R-01 |
Seismic Design of Liquid-Containing Concrete Structures (ACI 350.3-01) and Commentary (ACI 350.3R-01) | ||
| ACI 350.3-06 | Seismic Design of Liquid-Containing Concrete Structures and Commentary | ||
| ACI 350,4R-04 | Design Considerations for Environmental Engineering Concrete Structures | ||
| ACI 351.1R-93 | Grouting for Support of Equipment and Machinery | ||
| ACI 351.3R-04 | Foundations for Dynamics Equipment | ||
| ACI 352R-02 | Recommendations for Design of Beam-Column Connection in Monolithic Reinforced Concrete Structures | ||
| ACI 355.1R-91 | State-of-the-Art Report of Anchorage to Concrete | ||
| ACI 355.2-00 ACI 355.2R-00 |
Evaluating the Performance of Post-Installed Mechanical Anchors in Concrete (ACI 355.2-00) and Commentary (ACI 355.2R-00) | ||
| ACI 355.2-01 ACI 355.2R-01 |
Evaluating the Performance of Post-Installed Mechanical Anchors in Concrete (ACI 355.2-01) and Commentary (ACI 355.2R-01) | ||
| ACI 357R-78 | Guide for the Design and Construction of Fixed Offshore Concrete Structures | ||
| ACI 357R-84 | Guide for the Design and Construction of Fixed Offshore Concrete Structures | ||
| ACI 357.1R-85 | State-of-the-Art Report on Offshore Concrete Structures for the Arctic | ||
| ACI 357.2R-88 | State-of-the-Art Report on Barge-Like Concrete Structures | ||
| ACI 358.1R-92 | Analysis and Design of Reinforced and Prestressed-Concrete Guideway Structures | ||
| ACI 360R-06 | Design of Slabs on Ground | ||
| ACI 362R-85 | State-of-the-Art Report on Parking Structures | ||
| ACI 363.2R-98 | Guide to quality Control and Testing of High-Strength Concrete | ||
| ACI 371R-98 | Guide for the Analysis, Design, and Construction of Concrete-Pedestal Water Towers | ||
| ACI 372R-03 | Design and Construction of Circular Wire- and Strand-Wrapped Prestressed Concrete Structures | ||
| ACI 408.2R-92 | State-of-the-Art Report on Bond Under Cyclic Loads | ||
| ACI 408.3-01 ACI 408.3R-01 |
Splice and Development Length of High Relative Rib Area Reinforcing Bars in Tension (408.3-01) and Commentary (408.3R-01) | ||
| ACI 408R-03 | Bond and Development of Straight Reinforcing Bars in Tension | ||
| ACI 423.3R-96 | Recommendations for Concrete Members Prestressed with Unbonded Tendons | ||
| ACI 423.4R-98 | Corrosion and Repair of Unbonded Single Strand Tendons | ||
| ACI 423.6-01 ACI 423.6R-01 |
Specification for Unbonded Single-Strand Tendons (ACI 423.6-01) and Commentary (ACI 423.6R-01) | ||
| ACI-ASCE Committee 426 | Suggested Revisions to Shear Provisions for Building Codes | ||
| ACI 435.9R-91 | State-of-the-Art Report on Control of Two-Way Slab Deflections | ||
| ACI 437R-91 | Strength Evaluation of Existing Concrete Buildings | ||
| ACI 437R-03 | Strength Evaluation of Existing Concrete Buildings | ||
| ACI 440.1R-01 | Guide for the Design and Construction of Concrete Reinforced with FRP Bars | ||
| ACI 440.1R-03 | Guide for the Design and Construction of Concrete Reinforced with FRP Bars | ||
| ACI 440.2R-02 | Guide for the Design and Construction of Externally Bonded FRP Systems for Strengthening Concrete Structures | ||
| ACI 440.3R-04 | Guide Test Methods for Fiber-Reinforced Polymers (FRPs) for Reinforcing or Strengthening Concrete Structures | ||
| ACI 440.4R-04 | Prestressing Concrete Structures with FRP Tendons | ||
| ACI 442R-88 | Response of Concrete Buildings to Lateral Forces | ||
| ACI 446.1R-91 | Fracture Mechanics of Concrete: Concepts, Models, and Determination of Material Properties | ||
| ACI 446.4R-04 | Report on Dynamic Fracture of Concrete | ||
| ACI 446.4R-04 | Report on Dynamic Fracture of Concrete | ||
| ACI 503R-80 | Use of Epoxy Compounds with Concrete | ||
| ACI 503R-80 |
Use of Epoxy Compounds with Concrete (Revised 1984) |
||
| ACI 503R-89 | Use of Epoxy Compounds with Concrete | ||
| ACI 503.1-79 ACI 503.2-79 ACI 503.3-79 ACI 503.4-79 |
ACI Standards 503.1-79, 503.2-79, 503.3-79, and 503.4-79 | ||
| ACI 503.1-92 ACI 503.2-92 ACI 503.3-92 ACI 503.4-92 |
ACI Standards 503.1-92, 503.2-92, 503.3-92, and 503.4-92 | ||
| ACI 504 | Guide to Joint Sealants for Concrete Structures | ||
| ACI 506.1R-98 | Committee Report on Fiber Reinforced Shotcrete | ||
| ACI 506.2-77 | Specifications for Materials Proportioning and Application of Shotcrete (ACI 506.2-77) | ||
| ACI 515.1R-79 | A Guide to the Use of Water proofing, Damp proofing, Protective, and Decorative Barrier Systems for Concrete | ||
| ACI 523.1R-92 | Guide for Cast-in-Place Low-Density Concrete | ||
| ACI 523.1R-06 | Guide for Cast-in-Place Low-Density Cellular Concrete | ||
| ACI 524R-93 | Guide to Portland Cement Plastering | ||
| ACI 524R-04 | Guide to Portland Cement-Based Plaster | ||
| ACI 530-88 | Building Code Requirements for Masonry Structures (ACI 530.1-88/ASCE 6-88) | ||
| ACI 530.1-88 | Specifications for Masonry Structures (ACI 530.1-88/ASCE 6-88) | ||
| ACI 530-92/ASCE 5-92/TMS 402-92 | Building Code Requirements for Masonry Structures | ||
| ACI 530-92/ASCE 5-92/TMS 402-92 | Commentary on Building Code Requirements for Masonry Structures | ||
| ACI 530.1-92/ ASCE 6-92/TMS 402-92 |
Specifications for Masonry Structures | ||
| ACI 530.1-92/ ASCE 6-92/TMS 602-92 |
Commentary on Specifications for Masonry Structures | ||
| ACI 530-99/ASCE 5-92/TMS 402-99 | Building Code Requirements for Masonry Structures | ||
| ACI 530.1-99/ ASCE 6-99/TMS 402-99 |
Specifications for Masonry Structures | ||
| ACI 530-99/ASCE 5-99/TMS 402-99 | Commentary on Building Code Requirements for Masonry Structures | ||
| ACI 530.1-99/ ASCE 6-99/TMS 402-99 |
Commentary on Specifications for Masonry Structures | ||
| ACI 530-02/ASCE 5-02/TMS 402-02 | Building Code Requirements for Masonry Structures | ||
| ACI 530.1-02/ ASCE 6-02/TMS 402-02 |
Specifications for Masonry Structures | ||
| ACI 530-02/ASCE 5-02/TMS 402-02 | Commentary on Building Code Requirements for Masonry Structures | ||
| ACI 530.1-02/ ASCE 6-02/TMS 602-02 |
Commentary on Specifications for Masonry Structures | ||
| ACI 530-05/ ASCE 5-05/TMS 402-05 |
Building Code Requirements for Masonry Structures | ||
| ACI 530.1-05/ ASCE 6-05/TMS 602-05 |
Specifications for Masonry Structures | ||
| ACI 530-05/ ASCE 5-05/TMS 402-05 |
Commentary on Building Code Requirements for Masonry Structures | ||
| ACI 530.1-05/ ASCE 6-05/TMS 602-05 |
Commentary on Specifications for Masonry Structures | ||
| ACI 531.1-76 | Specification for Concrete Masonry Construction (ACI 531.1-76) (Revised 1981) | ||
| ACI 531-79 ACI 531R-79 |
Building Code Requirements for Concrete Masonry Structures (ACI 531-79) and Commentary (ACI 531R-79) | ||
| ACI 531-79 ACI 531R-79 |
Building Code Requirements for Concrete Masonry Structures (ACI 531-79) and Commentary (ACI 531R-79) (Revised 1983) | ||
| ACI 533.1R-02 | Design Responsibility for Architectural Precast-Concrete Projects | ||
| ACI 546R-04 | Concrete Repair Guide | ||
| ACI 546.2R-98 | Guide to Underwater Repair of Concrete ACI 548 Polymers in Concrete | ||
| ACI 548 | Polymers in Concrete | ||
| ACI 548.1R-92 | Guide for the Use of Polymers in Concrete | ||
| ACI 548.3R-91 | State-of-the-Art Report on Polymer-Modified Concrete | ||
| ACI 548.3R-03 | Polymer-Modified Concrete | ||
| ACI 548.6R-96 | Polymer Concrete - Structural Applications - State-of-the-Art Report | ||
| ACI 549.1R-88 | Guide for the Design, Construction, and Repair of Ferrocement | ||
| ACI 549.2R-04 | Report on Thin Reinforced Cementitious Products | ||
| ACI 550R-93 | Design Recommendations for Precast Concrete Structures | ||
| ACI 550.1R-01 | Emulating Cast-in-Place Detailing in Precast Concrete Structures | ||
| ACI 55R-01 | Removal and Reuse of Hardened Concrete | ||
| ACI Bibliography No. 11 | Foundations for Equipment and Machinery (Annotated) | ||
| ACI Bibliography No. 12 | Torsion in Concrete (Annotated) | ||
| ACI Bibliography No. 14 | History of Concrete, 30 BC to 1926 AD (Annotated) | ||
| ACI Educational Bulletin No. E1-78 | Aggregates for Concrete | ||
| ACI Educational Bulletin No. E2-78 | Reinforcing Steel - Its Use and Benefits in Concrete | ||
| ACI Educational Bulletin No. E3-83 | Hydraulic Cements for Concrete | ||
| ACI, Information for Members | |||
| ACI - SC 02-88 | Silica Fume, Fly Ash, and Slags: Their Role in Making Better Concrete (Annual Concrete Lecture - 1988) | ||
| ASTM: Cement, Concrete, and Aggregates, Vol. 1, No.2, 1979 | |||
| ASTM: Cement, Concrete, and Aggregates, Vol. 2, No. 1, 1980 | |||
| Aesthetics in Concrete Bridge Design: MP-1 | |||
| Compilation 2, ACI | Concrete Construction | ||
| Compilation 16, ACI | Quality Assurance in Concrete Construction | ||
| Compilation 20, ACI | Repair and Rehabilitation II | ||
| Compilation 22, ACI | Mineral Admixtures | ||
| Compilation 23, ACI | Chemical Admixtures | ||
| Concrete Masonry Handbook; for Architects, Engineers, Builders | |||
| FAA - Standard Specifications for Construction of Airports (1968) | |||
| Guide to the Design of Anchor Bolts and Other Steel Embedments (Authorized Reprint from Concrete International Design and Construction, July 1981 Vol.3 No. 7) | |||
| Journal of the American Concrete Institute Proceedings V. 76, No. 9, September 1979 | |||
| Journal of the American Concrete Institute Proceedings V. 76, No. 11, November 1979 | |||
| Masonry Designers Guide | |||
| Nycon Inc., Nylon 6 Secondary Concrete Reinforcement | |||
| PCC Pavements for Low-Volume Roads and City Streets (National Cooperative Highway Research Program, Synthesis of Highway Practice 27) | |||
| Problems for Mechanics (Preliminary Edition) | |||
| Standard Specifications for Public Works Construction (1969 Edition) | |||
ACI Manuals |
|||
| (1) | Manual of Concrete Practice, 1974 Part 1 Materials and Properties of Concrete Construction Practices and Inspection of Pavements and Slabs | ||
| (2) | Manual of Concrete Practice, 1992 Part 4 Bridges, Substructures, Sanitary, and Other Special Structures; Structural Properties | ||
| (3) | Manual of Concrete Practice, 1992 Part 5 Masonry, Precast concrete, Special Processes | ||
| (4) | Manual of Concrete Practice, 1999 Part 2 Construction Practices and Inspection of Pavements | ||
| (5) | Manual of Concrete Practice, 1999 Part 3 Use of Concrete in Buildings Ð Design, Specifications, and Related Topics | ||
| (6) | Manual of Concrete Practice, 1999 Part 4 Bridges, Substructures, Sanitary, and Other Special Structures; Structural Properties | ||
| (7) | Manual of Concrete Practice, 1999 Part 5 Masonry, Precast Concrete, Special Processes | ||
| (8) | Manual of Concrete Practice, 2001 Part 1 Materials and General Properties of Concrete | ||
| (9) | Manual of Concrete Practice, 2001 Part 2 Construction Practices and Inspection of Pavements | ||
| (10) | Manual of Concrete Practice, 2001 Part 3 Use of Concrete in Buildings Ð Design, Specifications, and Related Topics | ||
| (11) | Manual of Concrete Practice, 2001 Part 4 Bridges, Substructures, Sanitary, and Other Special Structures; Structural Propertieses | ||
| (12) | Manual of Concrete Practice, 2001 Part 5 Masonry, Precast Concrete, Special Processes | ||
| (13) | Manual of Concrete Estimating | ||
| (14) | Manual of Concrete Inspection | ||
| (15) | ACI Manual of Concrete Practice 2002 Index | ||
| (16) | Manual of Concrete Practice, 2002 Part 1 - ACI 104-71 (97) to ACI 223-98 | ||
| (17) | Manual of Concrete Practice, 2002 Part 2 - ACI 224R-01 to ACI 313R-97 | ||
| (18) | Manual of Concrete Practice, 2002 Part 3 - ACI 315-99 to ACI 343R-95 | ||
| (19) | Manual of Concrete Practice, 2002 Part 4 - ACI 345R-91 (97) to ACI 355.2/355.2R01 | ||
| (20) | Manual of Concrete Practice, 2002 Part 5 - ACI 357R-84 (97) to ACI 503.6R-97 | ||
| (21) | Manual of Concrete Practice, 2002 Part 6 - ACI 504R-90 (97) to ACI T1.1/T1.1R01 | ||
| (22) | ACI Manual of Concrete Practice 2003 Index | ||
| (23) | Manual of Concrete Practice, 2003 Part 1 - ACI 104-71 (97) to ACI 223-98 | ||
| (24) | Manual of Concrete Practice, 2003 Part 2 - ACI 224R-01 to ACI 313R-97 | ||
| (25) | Manual of Concrete Practice, 2003 Part 3 - ACI 315-99 to ACI 343R-95 | ||
| (26) | Manual of Concrete Practice, 2003 Part 4 - ACI 345R-91 (97) to ACI 355.2/355.2R01 | ||
| (27) | Manual of Concrete Practice, 2003 Part 5 - ACI 357R-84 (97)to ACI 503.6R-97 | ||
| (28) | Manual of Concrete Practice, 2003 Part 6 - ACI 504R-90 (97) to ACI T1.1/T1.1R01 | ||
| (29) | ACI Manual of Concrete Practice 2004 Index | ||
| (30) | Manual of Concrete Practice, 2004 Part 1 - ACI 104-71 (97) to ACI 223-98 | ||
| (31) | Manual of Concrete Practice, 2004 Part 2 - ACI 224R-01 to ACI 313R-97 | ||
| (32) | Manual of Concrete Practice, 2004 Part 3 - ACI 315-99 to ACI 343-95 | ||
| (33) | Manual of Concrete Practice, 2004 Part 4 - ACI 345R-91 (97) to ACI 355.2/355.2R01 | ||
| (34) | Manual of Concrete Practice, 2004 Part 5 - ACI 357R-84 (97)to ACI 503.6R-97(03) | ||
| (35) | Manual of Concrete Practice, 2004 Part 6 - ACI 504R-90 (97) to ACI T1.2-03/T1.2R-03 | ||
| (36) | ACI Manual of Concrete Practice, 2005 Index | ||
| (37) | Manual of Concrete Practice, 2005 Part 1 - ACI 104-71 (97) to ACI 223-98 | ||
| (38) | Manual of Concrete Practice, 2005 Part 2 - ACI 224R-01 to ACI 313R-97 | ||
| (39) | Manual of Concrete Practice, 2005 Part 3 - ACI 315-99 to ACI 343R-05 | ||
| (40) | Manual of Concrete Practice, 2005 Part 4 - ACI 345R-91 (97) to ACI 355.2/355.2R-04 | ||
| (41) | Manual of Concrete Practice, 2005 Part 5 - ACI 357R-84 (97)to ACI 503.6R-97(03) | ||
| (42) | Manual of Concrete Practice, 2005 Part 6 - ACI 504R-90 (97) to ACI ITG-3-04 | ||
Copyright © 2000 - 2007, ACI
- Northern California/Western Nevada Chapter. All
rights reserved.
Website designed by Michelle Craig
Website powered by Evocative,
Inc.
Send comments and questions to:
webmaster@aci-ncawnv.org
